Bd-mfg XT Bedienungsanleitung PDF herunterladen

XT FLOW CENTER

INSTALLATION INSTRUCTIONS

Fig. 1.

NOTE: Read the entire instruction manual before starting the installation.

WARRANTY

This flow center is warranted for two years from date of sale. Alleged defective product must be returned to B&D Mfg.,

Inc., 901 9th Street, Scranton, Iowa 51462, for inspection via prepaid freight. Defective parts will be repaired or

replaced at the manufacturer’s discretion. No allowance for labor or property damage is implied. Warranty of

performance is limited to the table provided with the unit and only when being used in a closed-loop, heat pump system.

No warranty of performance is provided when pump(s) are provided by others.

INTRODUCTION

These instructions cover the installation of the XT Flow Center (Part 2-230XT-SS). The XT Flow Center is a prepackaged

pumping station to be used with closed-loop, ground source heat pumps. The package contains a water vessel, an air-

eliminating dip tube, a pump protecting check valve, pump(s) and ball valves that allow the pump(s) to be removed for

service without loss of fluid to the system.

SAFETY CONSIDERATIONS

Installing and servicing of air conditioning and heating equipment can be hazardous due to system pressures and

electrical components. Only trained, qualified personnel should install, start-up and service this equipment.

Untrained personnel can perform basic maintenance functions such as cleaning coils or cleaning and replacing filters. All

other operations should be performed by trained service personnel.

When working on the equipment, observe precautions in the literature, tags, stickers and labels attached to the

equipment and to any other safety precautions that apply.

Follow all safety codes. Wear safety glasses and work gloves.

B&D Mfg, Inc

901 9th Street

Scranton, IA 51462

Phone (712) 652-3424

Fax (712) 652-3388

www.bdmfginc.com

Patent No. 5,244,037

0 102030405060

FTHD

FLO W GPM

PumpCurves

UP43‐100F

Series

Figure 1

1 2 3 4

Inhaltsverzeichnis

Seite 1 - XT FLOW CENTER

XT FLOW CENTER INSTALLATION INSTRUCTIONS Fig. 1. NOTE: Read the entire instruction manual before starting the installation. WARRANTY This flow cente

Seite 2

Fig. 2. Recommended Piping Schematic For Maximum Flexibility (Required With Internal Headers) Fig. 3. Recommended Schematic (For Use with Underg

Seite 3

3 2. Open the ball valves on both sides of the pumps. 3. Close all loop header valves except one pair (See Fig. 2). NOTE: Before proceeding, be

Seite 4 - Back Of Unit

Electrical: 1/60/230V Insulation: Foam Cabinet Approx. Volume of Fluid: 8.5 gal. HP = 1 1/4" FPT LOOP = 1 1/4" FPT H =

Kommentare zu diesen Handbüchern

Keine Kommentare

Bd-mfg XT Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Hardware Bd-mfg XT herunter. B&D Mfg XT User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Bd-mfg XT